Key Features
24/7 Autonomous Patrol:
Pre-programmed routes with dynamic re-routing based on real-time alerts.
Thermal Imaging:
Infrared camera for detecting heat anomalies, equipment overheating, and
intruders.
AI Anomaly Detection:
Deep learning algorithms identify unusual activities, unauthorized access, and safety hazards.
Environmental Monitoring:
Air quality, temperature, humidity, and noise level sensors for facility management.
Emergency Response:
Integrated siren, strobe light, and two-way communication for immediate incident response.
Fleet Coordination:
Multi-robot coordination for comprehensive coverage of large facilities.
Technical Specifications
|
Parameter |
Specification |
|
Model Number |
KL-B01 |
|
Type |
Autonomous patrol & inspection robot |
|
Primary Function |
Security patrol, facility inspection |
|
Sensors |
RGB + Thermal IR + LiDAR + Gas/Temp/Humidity |
|
AI Capabilities |
Object detection, anomaly recognition |
|
Navigation |
SLAM + GPS/ RTK outdoor navigation |
|
Max Speed |
5-8 km/h |
|
Battery Life |
6-10 hours per charge |
|
Protection Rating |
IP65 (dust/waterproof) |
|
Operating Temperature |
-20°C to 50°C |
|
Certifications |
CE, FCC, RoHS, IP65 |
Performance & Capabilities
Precision & Consistency:
Every operation is executed with robotic precision, ensuring uniform quality output across thousands of cycles.
Intelligent Automation:
AI-driven workflow optimization reduces human intervention to near-zero while maximizing throughput.
Scalable Deployment:
From single-unit pilot to multi-unit fleet, the KL-B01 scales seamlessly with your business growth.
Data-Driven Insights:
Built-in analytics provide real-time operational data for continuous improvement and ROI tracking.
Application Scenarios
1. Industrial Parks & Manufacturing Plants
2. Commercial Real Estate & Office Complexes
3. Data Centers & Server Farms
4. Power Plants & Substations
5. Warehouses & Logistics Centers
Certifications & Compliance
The KL-B01 is designed and manufactured in compliance with international quality and safety standards including CE (European Conformity), FCC (Federal Communications Commission), RoHS (Restriction of Hazardous Substances), and ISO 9001 Quality Management System. All food-contact components (where applicable) meet FDA and EU food safety regulations.
Customer Case Studies
Case 1: Data Center Operator (USA)
Challenge: 24/7 monitoring of server room temperature, humidity, and security with limited staff.
Solution: Deployed 2 × KL-B01 for continuous patrol with thermal imaging and environmental sensors.
Result: Detected 3 potential equipment failures before they caused outages, security incident response time reduced by 80%.
Case 2: Industrial Chemical Plant (China)
Challenge: Hazardous environment inspection requiring human workers to enter dangerous zones.
Solution: Replaced manual patrols with KL-B01 equipped with gas detection and thermal cameras.
Result: Zero human exposure to hazardous areas, detected 2 gas leaks early, compliance audit score improved to 98%.
Case 3: Commercial Real Estate Portfolio (Australia)
Challenge: Night security patrol across 5 office buildings with high guard turnover.
Solution: Deployed KL-B01 fleet with centralized monitoring center for after-hours patrol.
Result: Security cost reduced by 45%, incident detection rate improved by 60%, zero guard turnover issues.
Cleaning & Maintenance Instructions
Daily Maintenance
• Perform visual inspection of all external components.
• Check battery level and initiate charging if below 30%.
• Clean sensor lenses and camera windows.
• Review system logs for any warnings or errors.
• Verify network connectivity and cloud sync status.
Weekly Maintenance
• Inspect wheel/leg mechanisms for wear and debris.
• Test all emergency stop functions.
• Clean and inspect charging contacts/docking station.
• Run full diagnostic self-test suite.
• Update navigation maps if environment has changed.
Monthly Maintenance
• Lubricate all joints and moving parts per maintenance schedule.
• Inspect battery health and charging cycle count.
• Calibrate all sensors and perception systems.
• Update firmware and AI models to latest versions.
• Conduct a full mechanical and electrical safety inspection.
⚠️ Important: Always disconnect power before performing any maintenance. Contact Kelly Robot technical support for any issues beyond routine maintenance.
Support
For service or spare parts,
contact: sales@kellyrobot.com | +86 13620131796


KL-C05A Intelligent Robotic Coffee Kiosk Solution
KL-C03A Smart Single-Arm Coffee Robotic Station
KL-C03B Premium Dual-Arm Coffee Robotic Station
KL-C01A Dual-Arm Latte Art Coffee Robot
KL-C02B High-Efficiency Single-Arm Coffee Robot
KL-M01A Autonomous Milk Tea & Boba Robotic Station
KL-I01A Autonomous Ice Cream Robotic Station
KL-R Series: High-Precision Collaborative Robots (Cobots)
KL-001 Full-Size Bipedal Humanoid Robot
KL-H01 Wheeled Humanoid Robot
KL-A01 L4 Autonomous Delivery Vehicle
KL-B01 Autonomous Patrol & Inspection Robot
KL-D01A Multi-Modal Bipedal Robot





































